Skinny Belts

3/4

Skinny belts are available in three widths, 5/8", 3/4", and 1". The belt shown to the right is a 3/4" black bridle leather belt with tan stitching. This belt was ordered without a buckle. 

The picture below left is a 1" wide dark brown harness leather belt. Below right is a 5/8" wide black bridle leather belt with a gold finish buckle.

1
5/8

For wider leather belts see the men's leather belts and bridle leather belt pages.

Available Colors:

Our Skinny belts come in six colors of bridle leather and six colors of harness leather. See color charts below. 

BRIDLE LEATHER COLORS - 

Bridle leather is dyed and finished on both sides at the tannery. 

Bridle leather colors are tan, chestnut, medium brown, british medium brown, dark brown and black.

HARNESS LEATHER COLORS -

The harness leather colors (left) are as close to the true colors as I can get. They, are standard colors and the belts are hand dyed by me. In actuality the colors in hand finished leather will vary within the same piece of leather similar to the way the color of wood varies when using stain. Every piece may have somewhat of a different shade. 

Colors shown above (left to right) is natural, tan, light brown, medium brown, dark brown and black.

The back of harness leather belts can be left "Natural", Sealed with a clear sealer, or dyed the color of the belt and then sealed. For black belts we recommend an un-dyed sealed back. 


Available Buckles for Skinny Belts

#1.0.1 for 5/8"
1.0.0 for 3/4"
#1.4 for 1"

Solid brass roller.

#1.2.6 for 5/8"
1.2.1 for 3/4"
#1.2.2 for 1"

Chrome finish over solid brass roller

#1.2.5 for 5/8"
1.2.3 for 3/4"
#1.2.4 for 1"

Stainless Steel roller

#2 for 1" belt.

Gold Finish over solid brass

#9.1
Available in 1".

Nickel finish over solid brass.  Oval center bar buckle. No keeper loop is required for a center bar buckle.

#9.5
Available in 1"

Solid brass. Oval center bar buckle.  No keeper loop is required for a center bar buckle.

#16.2 5/8"
#16.1 in 3/4"
16.0 in 1"

Stainless steel roller buckle.

#16.5 for 5/8"
#16.4 for 3/4"
#16.3 for 1"

Solid brass roller buckle with stainless steel tongue.

#17 for 5/8"
17.1 for 3/4"
#17.2 for 1"

Nickel finish over solid brass.

#17.4 for 5/8"
17.5.1 for 3/4"
#17.6 for 1"

Solid brass.

#18.2 for 5/8"
#18.0.2 for 3/4"
#18 for 1"

The 5/8" and 3/4" in stainless steel only.  The 1" is chrome finish over solid brass.

#18.5 for 5/8"
18.3.1 for 3/4"
#18.4 for 1"

Solid brass



Belt Measurement - Center Hole Measurement for Skinny Belts

See Determining Your Belt Measurement before ordering. It is extremely important to provide me with your correct belt measurement. I cannot accept returns for belts that are too big or small if the wrong measurement is provided. So please take the time to measure before ordering.

If you are ordering a belt without a buckle  click here for measurement instructions. 



Build and Order Your Skinny Belts Below

 

Required Selection *

Belt Width  *


Center Hole Measurement  *
  Please measure.

Select Leather & Color  *


Select Buckle Number  *


If No Buckle do you want a tongue slot?
 

Select Keeper loops  *
 

Brass or Nickel Screws  *
 

Back of Belt Finish  *


Edge Stitching


Comments






Return from Skinny Belts page to Home page.